| Clàr paramadair comas pròiseas | ||||
| Nì | Sampall (≤3 sq.m) | Toradh maise | ||
| 1 | Seòrsa stuth | Tg àbhaisteach FR4 | S1141, KB 6160 | S1141, KB 6160 |
| 2 | TG meadhanach | KB6165, IT158 | KB6165, IT158 | |
| 3 | Tg àbhaisteach FR4 (saor bho halogen) | S1150G, Lianmao:IT | S1150G | |
| 4 | Àrd TG FR-4 (saor bho halogen) | S1165, Lianmao:IT | S1165 | |
| 5 | Àrd TG FR-4 | S1170, S1000-2, KB6167, KB6168, Ainm: IT180A | S1170, S1000-2, KB6167, KB6168, Ainm: IT180A | |
| 6 | CTI àrd (≥600) | S1600 KB7150C | S1600 KB7150C | |
| 7 | Min.tighead dielectric 0.26mm +/- 0.05mm (Is e CTI PP àrd a-mhàin 7628, agus mar sin tha feum air measgachadh de 7628 + 1080) | Min.tighead dielectric 0.26mm +/- 0.05mm (Is e CTI PP àrd a-mhàin 7628, agus mar sin tha feum air measgachadh de 7628 + 1080) | ||
| 8 | Ceramic air a lìonadh le tricead àrd | Rogers 4000 sreath Rogers 3000 sreath | Rogers 4000 sreath Rogers 3000 sreath | |
| 9 | Àrd tricead PTFE | Sreath Taconic, sreath Arlon, sreath Nelco, Taizhou NetLing F4BK, Sreath TP | Sreath Taconic, sreath Arlon, sreath Nelco, Taizhou NetLing F4BK, Sreath TP | |
| 10 | Stuth measgaichte | Sreath Rogers4000+FR4, Sreath Rogers3000+FR4, FR4+ bonn alùmanum | Sreath Rogers4000+FR4, Sreath Rogers3000+FR4 | |
| 11 | Àireamh de shreathan: ≤8 sreathan | Àireamh de shreathan: ≤8 sreathan | ||
| 12 | PP cuibhrichte gu TG FR4 àbhaisteach àrd (Ma tha feum air Rogers PP, feumaidh luchd-ceannach an toirt seachad) | / | ||
| 13 | Bonn meatailt | Bunait copair aon-thaobhach, bonn alùmanum aon-thaobhach | Bunait copair aon-thaobhach, bonn alùmanum aon-thaobhach | |
| 14 | Seòrsa PCB | Laminated ioma-fhilleadh airson dall agus air a thiodhlacadh | A 'bruthadh air an aon taobh ≤ 4 tursan | A 'bruthadh air an aon taobh ≤ 2 tursan |
| 15 | Bòrd HDI | 1+N+1 、 2+N+2 | 1+N+1 | |
| 16 | An àireamh de shreathan | àbhaisteach FR4 àrd Tg | Sreathan 1-22, (feumar TG àrd a chleachdadh airson 10L agus gu h-àrd) | Sreathan 1-18, (feumar TG àrd a chleachdadh airson 10L agus gu h-àrd) |
| 17 | Làimhseachadh uachdar | Seòrsa làimhseachadh uachdar (gun luaidhe) | HASL-LF | HASL-LF |
| 18 | EIG | EIG | ||
| 19 | Airgiod bogaidh | Airgiod bogaidh | ||
| 20 | Stuth bogaidh | Stuth bogaidh | ||
| 21 | OSP | OSP | ||
| 22 | Luchdaich a-nuas òr nickel palladium | Luchdaich a-nuas òr nickel palladium | ||
| 23 | Plating cruaidh òir | Plating cruaidh òir | ||
| 24 | A 'cur mheòir òir (a' gabhail a-steach corragan òir air an sgaradh) | A 'cur mheòir òir (a' gabhail a-steach corragan òir air an sgaradh) | ||
| 25 | Òr bogaidh + OSP | Òr bogaidh + OSP | ||
| 26 | Òr bogaidh + plating chorragan òir | Òr bogaidh + plating chorragan òir | ||
| 27 | Stuth bogaidh + plating meur òir | Stuth bogaidh + plating meur òir | ||
| 28 | Airgead bogaidh + meur òir plating | Airgead bogaidh + meur òir plating | ||
| 29 | Seòrsa làimhseachadh uachdar (stiùir) | HASL | HASL | |
| 30 | HASL + meur òir: an astar eadar ceap HASL agus meur òir | 3mm | 3mm | |
| 31 | Meud PCB crìochnaichte (MAX) | HASL: 558*1016mm | HASL: 558*610mm | |
| 32 | HASL-LF: 558*1016mm | HASL-LF: 558*610mm | ||
| 33 | Meur òir plating: 609 * 609mm | Meur òir plating: 609 * 609mm | ||
| 34 | Plating òr cruaidh: 609 * 609mm | Plating òr cruaidh: 609 * 609mm | ||
| 35 | ENIG: 530*685mm | ENIG: 530*610mm | ||
| 36 | Stuth bogaidh: 406*533mm | Stuth bogaidh: 406*533mm | ||
| 37 | Airgead bogaidh: 457*457mm | Airgead bogaidh: 457*457mm | ||
| 38 | OSP: 609*1016mm | OSP: 558*610mm | ||
| 39 | Bogadh Nickel Palladium òr: 530*685mm | Bogadh Nickel Palladium òr: 530*610mm | ||
| 40 | Meud PCB crìochnaichte (MIN) | Meud: 5*5mm | Meud: 50*50mm | |
| 41 | HASL-LF: 5*5mm | HASL-LF: 50*50mm | ||
| 42 | Meur òir plating: 40 * 40mm | Meur òir plating: 40 * 40mm | ||
| 43 | Plating òr cruaidh 5 * 5mm | Plating cruaidh òr 50 * 50mm | ||
| 44 | ENIG: 5*5mm | ENIG: 50*50mm | ||
| 45 | Stuth bogaidh: 50 * 100mm | Stuth bogaidh: 50 * 100mm | ||
| 46 | Airgead bogaidh: 50 * 100mm | Airgead bogaidh: 50 * 100mm | ||
| 47 | OSP: 50*100mm | OSP: 50*100mm | ||
| 48 | Bogadh Nickel palladium òr: 5*5mm | Bogadh Nickel palladium òr: 50 * 50mm | ||
| 49 | Aonadan pannal a dhìth, Min.meud pannal 80 * 100mm | / | ||
| 50 | Bòrd tiugh | HASL- LF: 0.5-4.0mm | HASL- LF: 1.0-4.0mm | |
| 51 | HASL: 0.6-4.0mm | HASL: 1.0-4.0mm | ||
| 52 | Òr bogaidh: 0.2-4.0mm | Òr bogaidh: 0.6-4.0mm | ||
| 53 | Airgid bogaidh: 0.4-4.0mm | Airgid bogaidh: 1.0-4.0mm | ||
| 54 | Tin bogaidh: 0.4-4.0mm | Tin bogaidh: 1.0-4.0mm | ||
| 55 | OSP: 0.4-4.0mm | OSP: 1.0-4.0mm | ||
| 56 | Bogadh Nickel Palladium òr: 0.2-4.0mm | Bogadh Nickel Palladium òr: 0.6-4.0mm | ||
| 57 | Plating cruaidh òr: 0.2-4.0mm | Plating cruaidh òr: 1.0-4.0mm | ||
| 58 | Plating meur òir: 1.0-4.0mm | Plating meur òir: 1.0-4.0mm | ||
| 59 | ENIG + OSP: 0.2-4.0mm | ENIG + OSP: 1.0-4.0mm | ||
| 60 | ENIG + plating meur òir: 1.0-4.0mm | ENIG + plating meur òir: 1.0-4.0mm | ||
| 61 | Stuth bogaidh + meur òir plating: 1.0- 4.0mm | Stuth bogaidh + meur òir plating: 1.0- 4.0mm | ||
| 62 | airgead bogaidh + plating meur òir: 1.0-4.0mm | airgead bogaidh + plating meur òir: 1.0-4.0mm | ||
| 63 | Tighead làimhseachadh uachdar | HASL | 2-40um (Meud uachdar staoin ≥20 * 20mm, is e an tighead as taine 0.4um; meud uachdar staoin gun luaidhe ≥20 * 20mm, is e an tighead as taine 1.5um) | 2-40um (Meud uachdar staoin ≥20 * 20mm, is e an tighead as taine 0.4um; meud uachdar staoin gun luaidhe ≥20 * 20mm, is e an tighead as taine 1.5um) |
| 64 | OSP | Tighead film: 0.2-0.3um | Tighead film: 0.2-0.3um | |
| 65 | òr bogaidh | Tighead òir: 0.025-0.1um tighead nicil: 3-8um | Tighead òir: 0.025-0.1um tighead nicil: 3-8um | |
| 66 | Airgid bogaidh | Tighead airgid: 0.2-0.4um | Tighead airgid: 0.2-0.4um | |
| 67 | Tin bogaidh | Tighead staoin: 0.8-1.5um | Tighead staoin: 0.8-1.5um | |
| 68 | Plating òir cruaidh | Tighead òir: 0.1-1.3um | Tighead òir: 0.1-1.3um | |
| 69 | Nickel Palladium bogadh | Tighead Nickel: 3-8um Tighead palladium: 0.05-0.15um Tighead òir: 0.05-0.1um | Tighead Nickel: 3-8um Tighead palladium: 0.05-0.15um Tighead òir: 0.05-0.1um | |
| 70 | Ola carbon | 10-50um (chan urrainnear ola gualain le riatanas strì a dhèanamh) | 10-50um (chan urrainnear ola gualain le riatanas strì a dhèanamh) | |
| 71 | Nuair a tha loidhnichean (tarsainn) fon ìre ola gualain | Masg solder àrd-sgoile | Masg solder àrd-sgoile | |
| 72 | Masg gorm peelable | Tighead: 0.2-0.5mm Modail àbhaisteach: Peters2955 | Tighead: 0.2-0.5mm Modail àbhaisteach: Peters2955 | |
| 73 | teip 3M | suaicheantas 3M | suaicheantas 3M | |
| 74 | Teip dìon-teas | Tighead: 0.03-0.07mm | Tighead: 0.03-0.07mm | |
| 75 | Drileadh | Tighead PCB as àirde le drileadh meacanaigeach 0.15mm | 1.0mm | 0.6mm |
| 76 | Tighead PCB as àirde le drileadh meacanaigeach 0.2mm | 2.0mm | 1.6mm | |
| 77 | Fulangas suidheachadh airson tuill meacanaigeach | +-3 mìle | +-3 mìle | |
| 78 | Trast-thomhas crìochnaichte toll meacanaigeach | Tha a' Mhin.tha meud toll airson leth tholl meatailte 0.3mm | Tha a' Mhin.meud toll airson leth toll meatailte tha 0.5mm | |
| 79 | Tha a' Mhin.meud toll airson bòrd stuth PTFE (a’ toirt a-steach cuideam measgaichte) 0.25mm | Tha a' Mhin.meud toll airson bòrd stuth PTFE (a’ toirt a-steach cuideam measgaichte) 0.3mm | ||
| 80 | Tha a' Mhin.tha meud toll airson bonn meatailt 1.0mm | / | ||
| 81 | Plàta tricead àrd làn ceirmeach (a ’toirt a-steach cuideam measgaichte): 0.25mm | Plàta tricead àrd làn ceirmeach (a ’toirt a-steach cuideam measgaichte): 0.25mm | ||
| 82 | An toll-troimhe meacanaigeach as àirde: 6.5mm. Ma tha e nas àirde na 6.5mm, tha feum air beagan reaming, agus is e fulangas trast-thomhas an tuill +/- 0.1mm | An toll-troimhe meacanaigeach as àirde: 6.5mm.Ma tha e nas àirde na 6.5mm, tha feum air beagan reaming, agus is e fulangas trast-thomhas an tuill +/- 0.1mm | ||
| 83 | Trast-thomhas toll tiodhlaichte dall meacanaigeach ≤0.3mm | Trast-thomhas toll tiodhlaichte dall meacanaigeach ≤0.3mm | ||
| 84 | Tro toll PCB tighead-trast-thomhas co-mheas | Max.10: 1 (nas àirde na 10: 1, PCB feumar a thoirt gu buil a rèir ar companaidh structar) | Max.8:1 | |
| 85 | Drileadh doimhneachd smachd meacanaigeach, co-mheas doimhneachd-trast-thomhas toll dall | 1:1 | 0.8:1 | |
| 86 | An astar as lugha eadar loidhnichean via agus eitseil de shreathan a-staigh (faidhle tùsail) | 4L: 6 mìle | 4L:7 mìle | |
| 87 | 6L:7 mìle | 6L: 8 mìle | ||
| 88 | 8L: 8 mìle | 8L: 9 mìle | ||
| 89 | 10L: 9 mìle | 10L: 10 mìle | ||
| 90 | 12L:9m | 12L: 12 mìle | ||
| 91 | 14L: 10 mìle | 14L:14m | ||
| 92 | 16L: 12 mìle | / | ||
| 93 | An t-astar as lugha eadar dall drileadh meacanaigeach agus loidhnichean sgudail de shreathan a-staigh (faidhle tùsail) | Aon uair brùth: 8mil | Aon uair brùth: 10mil | |
| 94 | Brùth dà uair: 10m | Brùth dà uair: 14m | ||
| 95 | Brùth trì tursan: 16m | / | ||
| 96 | Min.astar eadar ballachan tuill de lìonra eadar-dhealaichte | 10mil (An dèidh dilating) | 12 mìle (An dèidh dilating) | |
| 97 | Min.astar eadar ballachan tuill den aon lìonra | 6mil (An dèidh dilating) | 8mil (An dèidh dilating) | |
| 98 | Min.Fulangas NPTH | ±2 mìle | ±2 mìle | |
| 99 | Min.fulangas airson tuill press-fit | ±2 mìle | ±2 mìle | |
| 100 | Fulangas doimhneachd toll ceum | ±6 mìle | ±6 mìle | |
| 101 | Fulangas doimhneachd toll bideanach | ±6 mìle | ±6 mìle | |
| 102 | Foighidinn trast-thomhas de tholl bideanach | ±6 mìle | ±6 mìle | |
| 103 | Ceàrn agus fulangas toll cianalach | Ceàrn: 82 °, 90 °, 100 °;fulangas ceàrn +/- 10 ° | Ceàrn: 82 °, 90 °, 100 °;fulangas ceàrn +/- 10 ° | |
| 104 | Trast-thomhas slot drileadh as ìsle (toradh crìochnaichte) | Slot PTH: 0.4mm;Sliotan NPTH: 0.5mm | Slot PTH: 0.4mm;Sliotan NPTH: 0.5mm | |
| 105 | Trast-thomhas toll plug roisín an toll anns an diosc (sgian drile) | 0.15-0.65mm （Bòrd tighead raon: 0.4-3.2mm) | 0.15-0.65mm （Bòrd tighead raon: 0.4-3.2mm) | |
| 106 | Trast-thomhas toll electroplating (sgian drile) | 0.15-0.3mm (Feumaidh am bòrd TG àrd a chleachdadh) | / | |
| 107 | Tighead copair toll | Toll tiodhlaichte dall meacanaigeach 18-20um, slighe meacanaigeach: 18-25um | Toll tiodhlaichte dall meacanaigeach 18-20um, slighe meacanaigeach: 18-25um | |
| 108 | Toll plug-in meacanaigeach: 18-35um | Toll plug-in meacanaigeach: 18-35um | ||
| 109 | Cearcall sèididh | Am meud fàinne as lugha de tholl meacanaigeach de shreathan a-muigh agus sreathan a-staigh | Bun-copair 1/3OZ, an dèidh tro dilating: 3mil; às deidh dilating toll co-phàirteach: 4mil | Bun-copair 1/3OZ, an dèidh tro dilating: 4mil; às deidh dilating toll co-phàirteach: 5mil |
| 110 | Bun-copair 1/2OZ, an dèidh tro dilating: 3mil; às deidh dilating toll co-phàirteach: 5mil | Bun-copair 1/2OZ, an dèidh tro dilating: 4mil; às deidh dilating toll co-phàirteach: 6mil | ||
| 111 | Copar bonn 1OZ, an dèidh tro dilating: 5mil; às deidh dilating toll co-phàirteach: 6mil | Copar bonn 1OZ, an dèidh tro dilating: 5mil; às deidh dilating toll co-phàirteach: 6mil | ||
| 112 | Trast-thomhas as ìsle de phloc BGA (tùsail) | Tighead copair crìochnaichte 1/1OZ: 10mil aig a’ char as lugha airson bòrd HASL;co-dhiù 8 mìle airson bùird uachdar eile | Tighead copair crìochnaichte 1/1OZ: 12mil aig a’ char as lugha airson bòrd HASL;10m as ìsle airson bùird uachdar eile | |
| 113 | Tighead copair crìochnaichte 2/2OZ: 14mil aig a’ char as lugha airson bòrd HASL;10m as ìsle airson bùird uachdar eile | Tighead copair crìochnaichte 2/2OZ: 14mil aig a’ char as lugha airson bòrd HASL;12m as ìsle airson bùird uachdar eile | ||
| 114 | Leud agus farsaingeachd loidhne (tùsail) | Làr a-staigh | 1/2 OZ: 3/3 mìle | 1/2 OZ: 4/4 mìle |
| 115 | 1/1OZ: 3/4m | 1/1OZ: 5/5 mìle | ||
| 116 | 2/2OZ: 5/5 mìle | 2/2OZ: 6/6 mìle | ||
| 117 | 3/3OZ:5/8mil | 3/3OZ:5/9m | ||
| 118 | 4/4OZ: 6/11m | 4/4OZ: 7/12 mìle | ||
| 119 | 5/5OZ: 7/14m | 5/5OZ: 8/15m | ||
| 120 | 6/6OZ:8/16mil | 6/6OZ: 10/18mil | ||
| 121 | Sreath a-muigh | 1/3OZ: 3/3mil Dùmhlachd loidhne: Is e a ’chuibhreann de loidhne 3mil ris an uachdar gu lèir (a’ toirt a-steach uachdar copair, substrate, cuairteachadh) ≤10% | / | |
| 122 | 1/2OZ: 3/4mil Dùmhlachd loidhne: a ’chuibhreann de uèirichean 3mil ris an uachdar gu lèir (a’ toirt a-steach uachdar copair, substrate, cuairt) ≤10% | 1/2OZ: 4/4mil Dùmhlachd loidhne: a ’chuibhreann de uèirichean 3mil ris an uachdar gu lèir (a’ toirt a-steach uachdar copair, substrate, cuairt) ≤20% | ||
| 123 | 1/1OZ: 4.5/5mil | 1/1OZ: 5/5.5m | ||
| 124 | 2/2OZ: 6/7 mìle | 2/2OZ: 6/8 mìle | ||
| 125 | 3/3OZ: 6/10m | 3/3OZ: 6/12 mìle | ||
| 126 | 4/4OZ: 8/13m | 4/4OZ: 8/16 mìle | ||
| 127 | 5/5OZ: 9/16 mìle | 5/5OZ:9/20mil | ||
| 128 | 6/6OZ: 10/19mil | 6/6OZ: 10/22mil | ||
| 129 | 7/7OZ: 11/22 mìle | 7/7OZ: 11/25 mìle | ||
| 130 | 8/8OZ: 12/26 mìle | 8/8OZ: 12/30 mìle | ||
| 131 | 9/9OZ: 13/30 mìle | 9/9OZ: 13/32 mìle | ||
| 132 | 10/10OZ: 14/35mil | 10/10OZ: 14/35mil | ||
| 133 | 11/11OZ: 16/40mil | 11/11OZ: 16/45m | ||
| 134 | 12/12OZ: 18/48mil | 12/12OZ: 18/50mil | ||
| 135 | 13/13OZ: 19/55mil | 13/13OZ: 19/60mil | ||
| 136 | 14/14OZ:20/60mil | 14/14OZ:20/66mil | ||
| 137 | 15/15OZ:22/66mil | 15/15OZ:22/70mil | ||
| 138 | 16/16OZ:22/70mil | 16/16OZ:22/75mil | ||
| 139 | Leud loidhne / fulangas farsaingeachd | 6-10 mìle:+/- 10% <6mil:+-1mil | ≤10 mil: +/- 20% | |
| 140 | > 10 mìle: +/- 15% | > 10 mìle: +/- 20% | ||
| 141 | Tighead copair eadar-dhealaichte (um) | 18/35, 35/70, 18/70, 35/105, 70/105 | 18/35, 35/70, 18/70, 35/105, 70/105 | |
| 142 | Masg solder / caractar | Dath an inc solder mask | Uaine, buidhe, dubh, gorm, dearg, liath, geal, purpaidh, orains, matt uaine, matt dubh, matt gorm, donn, follaiseach ola | Uaine, buidhe, dubh, gorm, dearg, geal, purpaidh, orains, matt uaine, matt dubh, matt gorm, ola follaiseach |
| 143 | Measgachadh ioma-inc | Aon sreath de masg solder le dà dhath, dà shreath le dathan eadar-dhealaichte | Dà shreath le dathan eadar-dhealaichte | |
| 144 | Trast-thomhas toll plug as àirde de inc masg solder | 0.65mm | 0.5mm | |
| 145 | Dath inc caractar | Geal, dubh, buidhe, liath, gorm, dearg, uaine | Geal, dubh, buidhe, liath, gorm, dearg, uaine | |
| 146 | àirde / leud caractar | 28*4 mìle | 28*4 mìle | |
| 147 | Fosgladh masg solder | Aon-thaobhach 1 mìle | Aon-thaobhach 3 mìle | |
| 148 | Solder mask location fulangas | +/- 2 mìle | +/-3 mìle | |
| 149 | Leud / àirde as ìsle de charactaran àicheil masg solder | Bòrd HASL: 0.3mm * 0.8mm, Bùird eile 0.2mm * 0.8mm | Bòrd HASL: 0.3mm * 0.8mm, Bùird eile 0.2mm * 0.8mm | |
| 150 | Drochaid mask solder | Uaine gleansach: 3mil | Glas gleansach: 4mil | |
| 151 | Dath matt: 4mil (feumaidh matt dubh a bhith 5mil) | Dath matt: 5mil (feumaidh matt dubh a bhith 6mil) | ||
| 152 | Eile: 5 mìle | Eile: 6 mìle | ||
| 153 | Pròifil | Fulangas pròifil | +/- 4 mìle | +/- 5 mìle |
| 154 | Foighidinn as ìsle airson sliotan bleith （PTH) | +/-0.13mm | +/-0.13mm | |
| 155 | Foighidinn as ìsle airson sliotan bleith （NPTH) | +/- 0.1mm | +/- 0.1mm | |
| 156 | Fulangas doimhneachd muilneadh doimhneachd fo smachd | +/- 4 mìle | +/- 6 mìle | |
| 157 | An t-astar eadar loidhne sgudail gu oir bùird | 8 mìle | 10 mìle | |
| 158 | An astar eadar V-CUT agus loidhne copair (T = tighead bòrd) | T<=0.4 mm Ceàrn 30 °: 0.25mm Ceàrn 45 °: 0.3mm Ceàrn 60 °: 0.4mm | T<=0.4 mm Ceàrn 30 °: 0.25mm Ceàrn 45 °: 0.3mm Ceàrn 60 °: 0.4mm | |
| 159 | 0.4mm Ceàrn 30 °: 0.3mm Ceàrn 45 °: 0.35mm Ceàrn 60 °: 0.4mm | 0.4mm Ceàrn 30 °: 0.3mm Ceàrn 45 °: 0.35mm Ceàrn 60 °: 0.4mm | ||
| 160 | 0.8mm Ceàrn 30 °: 0.4mm Ceàrn 45 °: 0.45mm Ceàrn 60 °: 0.55mm | 0.8mm Ceàrn 30 °: 0.4mm Ceàrn 45 °: 0.45mm Ceàrn 60 °: 0.55mm | ||
| 161 | 1.20mm Ceàrn 30 °: 0.45mm Ceàrn 45 °: 0.5mm Ceàrn 60 °: 0.65mm | 1.20mm Ceàrn 30 °: 0.45mm Ceàrn 45 °: 0.5mm Ceàrn 60 °: 0.65mm | ||
| 162 | 1.80mm Ceàrn 30 °: 0.5mm Ceàrn 45 °: 0.55mm Ceàrn 60 °: 0.7mm | 1.80mm Ceàrn 30 °: 0.5mm Ceàrn 45 °: 0.55mm Ceàrn 60 °: 0.7mm | ||
| 163 | T≥2.05mm Ceàrn 30 °: 0.55mm Ceàrn 45 °: 0.6mm Ceàrn 60 °: 0.75mm | T≥2.05mm Ceàrn 30 °: 0.55mm Ceàrn 45 °: 0.6mm Ceàrn 60 °: 0.75mm | ||
| 164 | ceàrn V-CUT | 20 °, 30 °, 45 °, 60 ° | 20 °, 30 °, 45 °, 60 ° | |
| 165 | Fulangas ceàrn V-CUT | +/- 5° | +/- 5° | |
| 166 | Ceàrn de chamfer meur òir | 20 °, 30 °, 45 °, 60 ° | 20 °, 30 °, 45 °, 60 ° | |
| 167 | Foighidinn doimhneachd de chamfer meur òir | +/- 0.1mm | +/- 0.1mm | |
| 168 | Fulangas ceàrn de chamfer meur òir | +/- 5° | +/- 5° | |
| 169 | An raon de leum v-gearradh | 8mm | 8mm | |
| 170 | Tighead bòrd V-CUT | 0.4--3.0mm | 0.4--3.0mm | |
| 171 | Tighead air fhàgail de V-CUT, (T = tighead bùird) | 0.4mm≤T≤0.6mm: 0.2±0.1mm | 0.4mm≤T≤0.6mm: 0.2±0.1mm | |
| 172 | 0.6mm≤T≤0.8mm: 0.35±0.1mm | 0.6mm≤T≤0.8mm: 0.35±0.1mm | ||
| 173 | 0.8mm＜T＜1.6mm: 0.4±0.13mm | 0.8mm＜T＜1.6mm: 0.4±0.13mm | ||
| 174 | T ≥1.6mm: 0.5±0.13mm | T ≥1.6mm: 0.5±0.13mm | ||
| 175 | Tighead bòrd as ìsle | Tighead bòrd as ìsle | 1L: 0.15mm +/- 0.05mm (airson uachdar ENIG a-mhàin) Max.Meud an aonaid: 300 * 300mm | 1L: 0.3mm +/- 0.1mm (a-mhàin airson airgead bogaidh, uachdar OSP) Max.Meud an aonaid: 300 * 300mm |
| 176 | 2L: 0.2mm +/- 0.05mm (airson uachdar ENIG a-mhàin) Max.Meud an aonaid: 350*350mm | 2L: 0.3mm +/- 0.1mm (dìreach airson airgead bogaidh, uachdar OSP) Max.Meud an aonaid: 300 * 300mm | ||
| 177 | 4L: 0.4mm +/- 0.1mm (airson ENIG, OSP, staoin bogaidh, airgead bogaidh a-mhàin) Max.Meud an aonaid: 350*400mm | 4L: 0.8mm +/- 0.1mm, Max.Meud an aonaid: 500*680mm | ||
| 178 | 6L: 0.6mm +/- 0.1mm Max.Meud an aonaid: 500*680mm | 6L: 1.0mm +/- 0.13mm Max.Meud an aonaid: 500*680mm | ||
| 179 | 8L: 0.8mm +/- 0.1mm Max.Meud an aonaid: 500*680mm | 8L: 1.2mm +/- 0.13mm Max.Meud an aonaid: 300 * 300mm | ||
| 180 | 10L: 1.0mm +/- 0.1mm Max.Meud an aonaid: 400 * 400mm | 10L: 1.4mm +/- 0.14mm Max.Meud an aonaid: 300 * 300mm | ||
| 181 | 12L: 1.4mm +/- 0.13mm Max.Meud an aonaid: 350*400mm | 12L: 1.6mm +/- 0.16mm Max.Meud an aonaid: 300 * 300mm | ||
| 182 | 14L: 1.6mm +/- 0.13mm Max.Meud an aonaid: 350*400mm | 14L: 1.8mm +/- 0.18mm Max.Meud an aonaid: 300 * 300mm | ||
| 183 | 16L: 1.8mm +/- 0.16mm Max.Meud an aonaid: 350*400mm | / | ||
| 184 | cuid eile | bacadh | Fulangas còmhdach a-staigh +/- 5% Fulangas còmhdach a-muigh +/- 10% | Fulangas bacadh: +/- 10% |
| 185 | ≤10 buidhnean | ≤5 buidhnean | ||
| 186 | Bòrd coil | Chan eil feum air inntrigeadh | Chan eil feum air inntrigeadh | |
| 187 | Truailleadh ian | ＜1.56 ug/cm2 | ＜1.56 ug/cm2 | |
| 188 | Duilleag-cogaidh | 0.5% (lamination co-chothromach, eadar-dhealachadh co-mheas copair air fhàgail taobh a-staigh 10%, copar èideadh còmhdaichte, gun còmhdach lom) | 1L <1.5%, Os cionn 2L <0.75% | |
| 189 | Inbhe IPC | IPC-3 | IPC-2 | |
| 190 | Iomall meatailt | Oir meatailt gun fhàinne (ach a-mhàin uachdar HASL) | iomall meatailt fàinne 10mil (ach a-mhàin uachdar HASL) | |
| 191 | Min.leud an rib ceangail: 2mm Min.suidheachadh ceangail: 4 àiteachan | Min.leud an rib ceangail: 2mm Min.suidheachadh ceangail: 6 àiteachan | ||
| 192 | Àireamh sreathach sgrion sìoda | urrainn | / | |
| 193 | Còd QR | urrainn | urrainn | |
| 194 | Deuchainn | An astar as ìsle eadar puing deuchainn agus oir bùird | 0.5mm | 0.5mm |
| 195 | Deuchainn strì as ìsle | 10 tha | 10 tha | |
| 196 | Seasmhachd insulation as àirde | 100 mìle | 100 mìle | |
| 197 | Volt deuchainn as àirde | 500V | 500V | |
| 198 | Pad deuchainn as ìsle | 4 mìle | 4 mìle | |
| 199 | An astar as ìsle eadar padaichean deuchainn | 4 mìle | 4 mìle | |
| 200 | Sruth dealain deuchainn as àirde | 200mA | 200mA | |
| 201 | Meud bùird as àirde airson deuchainn prìne itealaich | 500*900mm | 500*900mm | |
| 202 | Meud bùird as àirde airson deuchainn inneal tàmh-àirneisean | 600*400mm | 600*400mm | |
Fàilte don làrach-lìn againn.